Step 2: Launch the tool and choose Junk File to get the Scan button. After that, hit Scan to scan Windows 10 for junk files. Step 3: In the result section, uncheck the Junk file scan result option firstly. Then check temporary files and other cache items. At last, click Clean to wipe them from your system. Although background programs can update themselves automatically, send you the notification, etc, it can consume the power, use the bandwidth and eat up system resources like RAM on the other side.
So, you are highly recommended to only keep the needed background programs. To close the unnecessary background programs, you can follow the steps here. Compared with their similar applications, some apps are better at managing memory. If your computer struggles with the specific program, you can try to find a lighter alternative for it. For example, you can use Google Chrome instead of Microsoft Edge if your computer crawls when running the Edge browser.
Find the small gray button in the power port and press it to open the memory compartment door. I used a spudger tool to get a little more purchase. The button raises the edge of the door.
So keep it depressed until you can remove the compartment door completely. Once off, set the door off to the side. The inside of the door has a diagram that shows how the RAM pop-up mechanism works and which way the RAM modules fit in. Locate the two levers on the right and left side and push them outward to release the memory cage. If you are removing the existing RAM from your iMac, pull the module straight up and out.
Depending on which iMac you have, the RAM notch might need to be oriented on the left or right. I'm installing RAM on a inch, late iMac, so for me the notch needs to be on the right side. RAM modules have a notch on the bottom. Depending on your iMac model the notch will either go in on the right or left. Install the new RAM by orienting the notch the correct way, setting it down in the slot and pressing firmly until you feel and hear it click into the slot. If you're installing only two new sticks of RAM place them in spaced apart.
For example, use the first and third slot or the second and fourth slots. Once all your RAM is installed, put the door back on, stand your iMac upright and plug it back in. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email.
This site uses Akismet to reduce spam. Learn how your comment data is processed. Like this: Like Loading Published: December 28, Leave a Reply Cancel reply Enter your comment here Fill in your details below or click an icon to log in:. Email required Address never made public. Name required. Next Post ». Follow Following. In order to access it you have to expose the logic board which increases the chance of damage from ESD if proper precautions aren't taken.
Because of this the only user replaceable part in the new minis is the RAM, since the logic board is still pretty well protected when only removing the RAM. The Magnusson Moss act essentially says they can't deny warranty unless they can prove damage.
It wouldn't be hard for Apple to say "The upgrade situation you described to us implies that there was a high risk for ESD damage, which has likely caused such and such issue". The flip side though is that if an Apple Authorized Service Provider AASP installs a third party hard drive your AppleCare will remain intact because the AASP has proved to Apple that its technicians follow all safety rules and procedures when working on Macs, essentially the same reason Apple allows them to perform warranty work.
0コメント