Remote control You can use the "Pointer Shape" command in the "Settings" menu to change the shape of the pointer to one of three different shapes. Page Security Functions Preventing theft Password Protect When the Password Protect function is activated, people who do not know the password will not be able to use the projector to project images, if the power has been disconnected since the password was last entered correctly. Page Setting Password Protect If "Password Timer" is set to "OFF", the password entry screen will be displayed each time the power plug is disconnected and reinserted from the electrical outlet.
Page 32 Security functions Turn "Password Timer" on. If you don't use this setting, proceed to step 4. This function is useful at times such as during show events so that only projection is carried out deactivating all buttons operation, or in places such as schools to limit the range of buttons that can be operated. Page 34 "Yes". The control panel buttons will be locked in accordance with the selected setting. There are two methods to cancel the projector's control panel lock.
Page Configuration Menu Configuration Menu This chapter explains how to use the configuration menu and its functions. Using the Configuration Menu Page List Of Functions List of Functions "Image" Menu The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source. Brightness Adjusts the image brightness. Page Signal" Menu All the adjustment values on the "Signal" menu, except "Computer Input", are returned to their default values.
Press the [Enter] button on the remote control or on the projector's control panel. If you would like to return all menu items to their default, see "Reset All". Operation When set to "ON", the operation of all buttons on the projector's control panel except for the [Power] button will be disabled.
Lock Pointer The shape of the pointer can be selected. Page Extended" Menu "Blue" or "Logo". The setting is enabled after turning the power supply off and then back on. To enable the EMP Link 21L, turn the projector's power off and wait until the cool down period has finished. Language Sets the language for message displays. Page Info" Menu List of Functions "Info" Menu Lets you check the status of the image signals being projected and the status of the projector.
If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time from 0 to 10 hours will be displayed as "0H". Lamp-Hours Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace the lamp. Reset Function Page Troubleshooting Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help Page Using The Help Using the Help If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem.
It uses a series of menus in a question and answer format. Page 46 Using the Help Repeat the operations in steps 2 and 3 to proceed through the menu to more detailed items. Press the [Help] button to exit the help menu. If the Help function does not provide a solution to the problem, refer to "Problem Solving" Page Problems Solving Problems Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help". Page Lamp Or Temp Indicator Flashes Orange 5 minutes the projector will switch to standby mode, so check the following two points.
After checking, press the [Power] button to turn the power back on. Page When The Indicators Provide No Help Computer monitors and LCD screens have different colour reproduction performance, so that the colours projected by the projector and the colours appearing on the monitor may not necessarily match, but this is not a sign of a problem.
Images appear dark sp. Page 52 If the connection is made while the power is already turned on, the function [Fn] key that switches the computer's video signal to external output may not work.
Epson is the registered trademark of Seiko Epson Corporation. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners.
Epson disclaims any and all rights in those marks. Specifications are subject to change without notice. Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it. In this case, press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to make the adjustment while computer or RGB video images are being projected.
In such cases, use the configuration menu commands to adjust the tracking and sync settings manually. Adjusting the Tracking. If vertical stripes appear in the projected computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Tracking g manually using the following procedure. A Select "Signal" from the configuration menu, and then select "Tracking". For details on this operation, refer to " Using the Configuration Menu ".
Check the buttons you can use and the operations they perform in the guide at the bottom of the screen. B Adjust the tracking until the vertical stripes disappear from the image. C Press menu. The image will flash when continuous tracking adjustment is carried out, but this is normal. Adjusting the Sync. If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync synchronisation g manually using the following procedure.
A Select "Signal" from the configuration menu, and then select "Sync. For details on this operation, refer to "Using the Configuration Menu ".
B Adjust the synchronization until the horizontal noise disappears from the image. Incorrect tracking adjustment may not be noticeable with some types of picture. However, pictures with lots of lines and shading will tend to show incorrect tracking adjustments more clearly, so check the tracking adjustment first. The following seven preset colour modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the colour mode that corresponds to the projected images.
The brightness of the images will vary depending on which colour mode is selected. Each time you press the button, the colour modes change in the following order. The current setting appears in the top-right corner of the screen each time the colour mode is changed. While the colour mode name is displayed on the screen, it does not change to the next colour mode setting unless you press the button. The colour mode can also be set using the "Color Mode" command in the "Image" menu.
A Using the button on the projector, perform zoom adjustment or keystone correction. The Image Shift adjustment screen is displayed after you finish making adjustments. C Press screen. The screen closes automatically if no operations are performed for about 10 seconds. When either the projector position or the angle of the projector is changed, you can readjust or perform the following operations. When the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the volume decreases.
The picture signal input from the connected equipment is automatically detected and projected. B The screen being searched for is displayed, and then the image is projected. You can choose the input source from this screen. Changes to the image from the Computer port.
Changes to the image from the S-Video port. Changes to the image from the Video port. When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected. This chapter explains useful functions for giving presentations and so on, and the security functions. Or if you are making a computer presentation and you do not want to show details, such as selecting different files. The source image continues to project even when the screen is frozen.
You can still perform operations such as changing files, without projecting any images. This function changes the aspect ratio g of images from to when component video g , S-Video g , or composite video g images are being projected.
Images which have been recorded in digital video or onto DVDs can be viewed in wide-screen format. This allows you to move a pointer icon on the projected image, and helps you draw attention to the area you are talking about. You can also make this setting using the "Resize" command in the "Signal" menu. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up.
Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Setup See the illustration on the right to choose the best position for your projected image.
Units: cm in. Do not stand this projector upright. Operating Range Left and Right Approx. Operating Range Up and Down Approx. Connecting to Visual Equipment. Turning on and Projecting. Remote Control Accessory Power Cable. In this mode, you can unplug the power cable. Green Warming up Wait for a short time about 30 seconds. Green Projecting. Setup the projector at a lower angle of tilt. Electricity is consumed if only the projector's power is turned off. Click on the page number to display that page.
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. Click the underlined word or words to display the corresponding entry in the "Glossary" section of the "Appendices". Example: [Esc] button " Menu Name " Indicates configuration menu items. Contents Projection Procedure Setup Projector Features You can enjoy images of "Photos", "Presentations", "Games", and so on, in the optimum colour tone by choosing the most suitable mode for your surroundings.
Source search allows you to easily choose the image to project Simply by pressing the "Source Search" button, the connected picture signal is automatically detected and projected. Easy to use, big button control panel For ease of use, buttons are classified and arranged according to their projection and adjustment functions.
Part Names and Functions 7. Computer port S-Video port Video port. Displays and closes the help, which shows solutions if a problem occurs. Part Names and Functions 8. Part Names and Functions 10 Remote Control If you position the over the button icon or button name, a description of that button will appear.
Outputs remote control signals. Using the remote control Using the control panel. Adjusting the Image Quality B Adjust the tracking until the vertical stripes disappear from the image.
0コメント